Denver Foam® is an open cell polyurethane backer rod serving as a backing for elastomeric and other applied caulking sealants. Denver Foam® controls the amount of sealant required and depth of the installation. Also, it forms the correct hour glass shape of sealant, assuring the contractor and owner the best adhesion and cohesion configuration possible.
TITAN FOAM™ is a soft, grey, non-gassing, pliable backer rod, with an impervious outer skin, used as a backing for elastomeric and other cold applied sealants. TITAN FOAM™ controls the depth of the applied sealants and ensures cross-sectional hour-glass configuration.
Mile High Foam® is a closed cell polyethylene backer rod serving as a backing for elastomeric and other applied caulking sealants. Mile High Foam controls the depth and amount of sealant required. Mile High Foam® also forms the correct hour glass shape of sealant, assuring the contractor and owner the best adhesion and cohesion configuration possible.
Mile High Foam XL® is a resilient, cross-linked polyethylene backer rod used as a backing material for hot and cold applied sealants. Due to its chemical make up, it can take high temperature sealant installations. Mile High Foam XL® controls the depth of the sealant installation and ensures cross-sectional hour-glass configuration. No bond breaker is required. Product has been tested and passed the heat resistance requirements of ASTM D 5249 at a certified independent laboratory.
ULTRA BLOCK® is a pre-engineered, patented textile fiberglass with fiberglass matt facing, containing approximately 30% by weight unexpanded vermiculite. ULTRA BLOCK® is primarily used in fire rated construction joints.
